Լight modeDark mode
Course content
Enphase Course
Replace IQ Battery- Check Certification Status in APP
- Find a System
- System Creation
- System Listing
- Tariff Editor
- Provision micro-inverters
- Scan Devices
- Sync a System to Enlighten
- Configure the Installer App
- Enable Production Meter
- Create System in App
- Assign Micro Inverters to an Array
- IQ battery Provisioning
- IQ Gateway in AP mode from iOS
- Envoy Ap mode for Android
- Adding Devices and Array to System
- Installer Ap Intro
- Installing the App
- Step 1. Finding Activation
- Step 2. Creating Systems
- Step 3. Defining Devices
- Step 4. Scanning iQ Gateway and Micro-Inverters Serial Numbers
- Step 5. Creating an Array in the Installer App
- Step 6. Mapping and Assigning Micro Inverters and Serial Numbers to Array Map
- Step 7. Scanning Batteries and Serial Numbers
- Step 8. Scanning iQ System Controller
- Step 9. Disabling Manual Override Switch on iQ System Controller MID
- Step 10. Connecting to and Programming the iQ Gateway with System info
- Step 11. Provisioning Devices
- Step 12. Configure and Enable Production Meter
- Step 13. Enable Consumption Meter
- Step 14. Check firmware readiness
- Step 15. Functional Test
- Rapid Shut Down Wiring and Trouble Shooting
- iQ System Controller Wiring and Components
- iQ Gateway wiring into System Controller
- iQ Gateway Breaker Wiring into System Controller
- Wiring the Rapid Shutdown Switch to your System Controller
- Storage, System Controller 2 and Back-Up
- Selecting the Correct Circuit Breakers for the Enphase Back-Up Systems
- Requirements for Circuit Breakers
- iQ Gateway Combiner 4/4c Best Practices
- Hold Down Kits. Breakers for Storage and Back-Ups
